Fitting a Cat Flap

It may seem difficult to set up the flap for your cat but with the right guidelines, it's not all that difficult. First, decide how high you want the flap to be (on average the belly height). Mark this point on your door and then use the template included as a guide when drilling.
If you have a young kitten you can prop the door open very slightly and gradually encourage it to go through. Reward the kitten as it passes.
Measure the Door
A cat flap is an excellent way to allow your pet to leave and come in and out of your home whenever it pleases. This can help keep your cat in good health as it will ensure that it is getting enough exercise and be able to go back inside if it gets trapped outside during bad weather. This can reduce the time you spend letting your cat out or in and make your home secure by letting you know when it has left.
However, it is essential that the flap on your cat is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly and the entrance to your home to ensure that the flap is at the right height. If your cat is a little longer or taller than the normal, you can adjust the position of the flap by moving it up or down by a tiny amount.
The next step is to utilize a spirit level mark the center of the door where you will be installing the flap. Then, using the marks as an indication, cut out the shape of your flap on the door with the aid of a Jigsaw. After you've cut the space, sand down the edges of the door to smooth the surfaces. Then drill any fixing holes that are required.
The process of installing the cat flap isn't as complicated as you think, and it shouldn't take more than two hours to complete the entire job from start to the end. However, the process can be slightly more complicated if you need to fit it into a uPVC or composite door since these doors come in an array of thicknesses, which affect how the holes are cut and the type of door they are fixed to. This is why we recommend calling a professional to complete the work, particularly if you have never worked with glass before.
Measure Your Cat
You will not have to spend hours of listening to the pet meow to be allowed in or out. This is especially helpful if you are at working all day and your cat is stuck inside waiting until you get home in any weather.
If you are planning to install a cat flap in your door, it is crucial to determine the size of your cat prior to beginning the task. It may seem like a simple task, but it is important to make sure you measure the right measurements. Otherwise, your pet may have difficulty putting it in use.
First, make sure cat flap installer near me is calm before you begin taking measurements. You'll need to keep your cat in a place in which they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.
Once you've got your cat's measurement and measurements, you need to examine the door to determine where to place the flap. A good tip is to position the flap on the highest point of your cat's stomach as it will allow them to move through it with minimal effort. This will also stop the flap making quite a lot of noise when it swings open and shut.
You will also need to consider the thickness and structure of the uPVC door or composite. While all timber doors have the same thickness to them, uPVC or composite doors can differ greatly in their overall structure. This could make the process of the process of putting in a flap for your cat more difficult as you have to make sure that the hole is the proper size.
You can make use of the template included in the instructions to mark the position of the opening on the door. This will help you determine the location where the opening should be and make sure that the template is properly placed on the door. It is also beneficial to employ a spirit-level to ensure that the template is perfectly against the door.
Cut the Flap
You'll need to make a hole in the door panel for your cat flap prior to you can install it. It's a challenging job so it's recommended you get a professional assist you if you don't have the knowledge or skills. It is also recommended to review the directions that come with the cat flap kit to discover how to do this properly.
You can use the height of your cat's or kitten's stomach as a guide. As a rule of thumb you should place the flap around 10-15 centimeters higher than the ground. This is the standard height of the stomach for cats. Your cat can move through the flap comfortably and also give the other cats or neighbours who are snooping a tough time trying to enter or leave.
Once you've determined the best location for the cat flap to be located, mark the location on the door using the help of a pencil. Then, if your kit comes with a paper template, lay this over the door and use the markings to drill holes in every corner of the template. You should then be able to cut the template's shape and replace it with your cat flap.
You can install your cat flap yourself inside a wood or uPVC door if you are confident using a Jigsaw. Be sure to not cut through any of the door's mullions, or vertical rails. You can use a jigsaw to cut the panel into a square or a circle according to the design of your cat flap. Remember to take your time and don't make the jigsaw cut faster.
Once the hole is made, carefully place the cat flap into its new place of residence. Make sure it is solidly secured. If the flap has screws put them on the protruding bolts. Once the screws are in place, sand any rough edges of the cut, and then apply sealant to any gaps to ensure there aren't any draughts entering into your home.
Place cat flap double glazing
If you have a basic cat flap you can open it and encourage your pet to use it by putting a little bit of cat food in front of the door. You can also try pushing the cat with a stick or your hand. Once your cat is used to walking through the flap it is likely to be able in and out as it pleases so you can let it in or out without having to be there holding the door open for it throughout the day (and likely in all weather conditions).
You can fit a cat flap into an UPVC or glass door but it's not quite as straightforward as fitting it into a wooden external door because the UPVC and glass doors don't have the same thickness. This can have a major impact on the way you cut out the flap's hole and whether the flap will fit correctly after installation.
The mounting kit may contain a template that outlines the best places to drill holes. If the kit doesn't include a template, you are able to make one yourself. When cutting, it's crucial to not push the jigsaw far enough to make a larger hole than necessary in your door.
Some cat flaps are available in circular shapes, which can be more difficult to put in. If you have a circular flap, make sure that the hole is located in the correct place on your door. If not, your cat may not be able use it, and may be locked outside for the entire day (or night).
Some cat flaps have locks which allow you to control the time your cat comes and goes. These can be very useful in the event that you are worried about your cat going out at night and then coming back in the darkness, or if you're at work all day. Some locks can be used to lock entry or exit, and others can be locked in both directions. This is helpful for sick or older cats who do not want to go outside in bad weather.