The Expert Guide To Double Glazing Lock Repairs

Double Glazing Lock Repairs
Quality locks on your windows and doors can stop burglars from entering your home. They don't usually like breaking glass or trying to squeeze through open windows.
Some double glazing owners, however, have experienced problems with their door or window lock following the installation. Fortunately, these issues are often fixable without having to pay for new double glazing.
Broken or Faulty Locks
If your uPVC window or door lock is damaged or broken, then a locksmith can fix it for you. They can repair hinges, striker plate and locks for your double-glazing. They will also be able to move the cylinder around to correct any misalignment issues which could cause the handle to not function correctly.
If the key fits in the lock but doesn't turn or is difficult to insert, the mechanism could be seized up. Dirt or grease can get stuck in the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the mechanism's inside. After lubricating the lock you must insert the key and then try to turn it. The lubricant should make its way through the mechanism, and the lock should be able turn without difficulty.
Loose screws within the lock mechanism are another reason for a malfunctioning lock. They can become loose and fall out, or even break off completely, preventing the lock from being able to work properly. These screws can be tightened using a screwdriver, but be careful not to overtighten them. This can damage the internal components.
A broken lock can be dangerous for both you and your family members, particularly if you have young children. They can open the door without knowing and gain access to your home. If you're worried that this might occur, a licensed professional locksmith can assist you to secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always required.
Handles that are damaged or broken
Many double-glazed windows have the multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about potential burglars trying to gain entry into their home. Ask your locksmith about antilift blocks. They can be put in alongside your existing locks and can aid in keeping your windows shut.
Handle locks are usually damaged or fail. They are the first component that criminals will utilize to force open your window. The good news is, this is one of the easiest parts to repair.
Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette that is designed to prevent forced entry. This security upgrade is often provided as an additional option on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot, again as an optional extra on new double glazed window installations.
If a handle is defective, it is essential to get the handle repaired as soon as is possible. A damaged handle could prevent the window from closing properly and permit drafts to get in. It could also be a weakness that opportunistic thieves could exploit and put your family's possessions and your own at risk.
The process of repairing the failed mechanism starts with gaining access to the frame of the window and removing the damaged handle. The gearbox that opens the handle is accessed and the type identified, so that a replacement may be sourced which is in line with the profile of the internal window frame mechanisms.
After the mechanism has been repaired the handle can be returned to the original screws. We recommend replacing them with more long screws as they will provide the most secure fit. The final step is to seal the handle using a clear sealant. This will help protect it from further corrosion. Once you've completed this step, your window should be functional again, and at a fraction of the cost of replacing it.
Hinges that are broken or damaged
If your windows do not close properly, you could suffer from draughts or an affliction of your home's security and an increased risk of water or damp damage. Broken or faulty window hinges are a typical problem that can be fixed easily.
If your windows made of uPVC won't open or close and close, it's likely hinges need to be repaired or replaced. Many window companies will require you to buy an entirely new window unit in order to fix this simple problem, but we can replace the hinges and save you money.
Window hinges can be damaged by repeated use or they are weakened over time by corrosion. If you find a broken hinge, it's important to take steps to prevent further damage by being careful not to push the window to open or close.
Identifying your hinge type will help you find the right parts to repair it. Maco, Mila and Roto are all window hinges. Get advice from a professional before buying parts that do not fit with your existing hardware. This can cause further damage.
Faulty hinges are a major issue for uPVC windows and doors. They can be an important source of noise, and can also allow water to enter your windows.
Check that the pin barrels on both sides of the hinge are aligned. If it's not, tap the head pin using an hammer to create an arc in the barrel of the hinge. This will help keep the pin in place. Then, ask a helper to hold the door while you take the hinges and hinges from both the doorjamb and the door. Replace the hinges with ones that are the same size and install the screws with glue. When the glue is drying, fix the hinges using weights or clamps.
Once the hinges have been fixed, you should be able to re-install the door and attach the handle. Replace the screws with wood dowels that are the same length as the original screw to ensure they are in line.
Broken or damaged glass
uPVC Windows can become damaged over time, despite the fact that they are extremely effective in keeping cold out and conserving the heat. This could include cracked or damaged glass as well as defective locks. If neglected, this could become a very costly issue. It can also detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as quickly as possible.
If your glass has cracked but not shattered, you can usually fix it yourself using the right tools and methods. Be sure that the area around the glass that has been broken is free of debris, so that fragments don't cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in a proper way. Then, put masking tape over the entire area to keep shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before applying glue is an ideal option in the case of windows that have two panes. This will ensure you have enough space to finish your project.
Before applying the glue wipe the entire surface of the broken frame and the glass with a a dry, clean cloth. Follow the application and curing instructions, which may vary from product to product. Based on link web page of the crack, you may need to clamp the glass during curing. This can be done using lightweight clamps that are specifically designed to support fragile materials.
After the adhesive has completely cure, carefully insert the glass in the window frame. Make sure double glazing repair is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Be cautious not to flex the window while it's reinstalled, as this can weaken the seal and cause water infiltration and condensation.
If you have a glass window that's broken completely or has bigger cracks, consult a professional glazier such as O'Brien(r) to arrange a replacement. Unattended handling of broken glass can pose a safety risk for pet and children It's therefore essential to act fast.