These Are The Most Common Mistakes People Make With Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.
Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.
Once window repairs has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the distance between the window and the door is significant, you may need to consider security screens that includes an opening. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.
Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows so you can reach the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in position.
If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
uPVC handles may also become loose. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.
3. Water Leaks
It is important to act if you get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.
It is a fairly easy fix that can be completed by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.
Verify that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.
Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.
It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's very simple to change a window hinge, but it's easier if someone helps hold the frame.
Make sure that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide advice.
Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It also decreases the risk of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few different factors. The hinges can also be misaligned due to wear, causing a gap where the sash and frame meet. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a good clean, but in some cases it might be necessary to have these replaced.
These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.
Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!
The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.