Fitting Cat Flap in UPVC Door Panel

Cat flaps allow your pet to come and go as they please, without you having to let him in or out. They can also help stop your cat from urinating in the house.
It is easier to install a cat flap on a upvc panel than a glass one, but you will require some expertise and correct tools.
Measure the Door
Installing a cat flap on the door can be a challenge but as long as you use the correct type of cat flap make sure you take your time and follow the steps provided it shouldn't be too difficult. We will show how to trace the shape, use an jigsaw for cutting out the door's opening and then complete the job by fixing the cat flap to the door. This will ensure that the flap remains in place and also protects the doors from damage caused by wind and rain.
The first thing to do is take a measurement of the width of your pet to get a precise measurement of what size of cat flap you'll need. This will allow you to choose a cat flap that is big enough for your pet to walk into the home and exit without having to open the door each time.
Once you have the measurements, you can mark where on the door the template should be placed. usually this is done with an X, however some kits come with drawings that show the location to drill, if you have one, then attach it to the door and draw a line around it. If your door has a moulding or sill on the bottom edge ensure that you have enough space because this will keep your cat safe and stop them from gaining access to your home.
Next put on your eye protection and dust mask and using a jigsaw, begin to cut according to the lines you've drawn in. Don't press the blade too hard because this will cause it to cut faster than you'd like it to. If you own a square that you have cut, make use of it to verify whether you're cutting in the right way and to make sure the hole is a proper rectangle shape, once you are satisfied with the shape, you can begin to remove the remaining door material.
Draw a Line
The cat flap lets you to let your pet go inside and out without having to worry about unwanted visitors or unwelcome gifts. It also helps prevent draughts and keeps your home's temperature stable. Installing a cat flap on your door can be a daunting task for those who haven't attempted it before. Many people call a professional carpenter or joiner to do the job. This is a viable option, however you can do it yourself, provided the tools are appropriate and the directions are adhered to.
While this is much simpler to accomplish when using a timber door it is still feasible in uPVC doors, though you must be cautious not to damage the doors since this could cause damage to your warranty. First, you need to take measurements of the door to ensure it will accommodate the new cat-flap. If you have an ordinary uPVC panel it's easy. However, if your door is composite or another type of door, you might have to be more cautious.
The next step is to determine the height of your cat's belly. This is the distance from the floor to the bottom of the cat's stomach, and you'll need find a spot near the door that will be within the range that your cat can comfortably pass through. Once you know this you'll have to draw the area with pencil and a spirit level so that you can be certain that the hole you make will be a good fit for your cat.
After you have marked the area, it's time to cut out the hole. You will need to use a jigsaw and it is crucial to take your time to ensure that the cuts are smooth and clean, rather than rough and uneven, as it could cause damage to your door. Be sure to wear safety glasses and a dust protection mask at all times when using the jigsaw, since inhaling the sawdust could be hazardous to your health. After you've finished the cutting, you will have to smooth the edges of the hole using sandpaper so that your cat flap can be fitted easily.
Make a hole
It can be a challenge to fit the cat flap onto a door panel or sealed double glazing unit. You may be tempted to do it yourself, but unless have experience in DIY it is recommended to hire a professional in to do the task for you. A shoddy job might not just be ugly, but it could also be an enigma for security as well as allowing cold air to enter when the cat is outside, and hot air to escape when inside.
The first thing you have to do is draw the position of the hole in the door with pencil and a spirit level. This will ensure that it is correctly positioned and that it runs parallel to the other components of the door. Make sure you have an sandpaper piece on ready to smooth out any rough edges.
Wear any safety gear you'll need to use an electric tool. If you are worried about the sound of the jigsaw, you can purchase a cordless version which is quieter and simpler to use.
It is important that you only cut away the material needed for the fitment of the cat flap. It is important to leave some extra material for the wall thickness of the cat flap. However cutting off too much material can cause problems or even damage the door frame.
If the door is made of upvc and is made of metal, or has a frame, it could interfere with the microchip flap. In this scenario you'll need make an oversize hole to ensure that the metal doesn't touch the walls of the flap.
If you're looking to install a cat flap inside a double-glazed or upvc window with metal frames you'll need to talk to an expert. They will offer you a brand new piece of glass with the hole already pre-made for the cat flap. It will be much cheaper to have this done than trying to fix the cat flap onto an existing glass pane that has not been manufactured specifically for the purpose.
Fit the Flap
Cat flaps allow your pet the freedom to move around anytime they want and let them relax in the house when they want to. However, if you have a uPVC door, it may be difficult to install a cat flap, particularly if you don't own a glass pane that can be cut for one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add a cat flap. It's not a simple matter of slicing a hole into the door. our website is also necessary to take a few steps to ensure it's secure.
A composite, uPVC or GRP door panel is typically comprised of a plastic skin which is bonded to an insulating polystyrene core. It is important to be careful when cutting the material. This kind of door has a template you can use to cut the hole.
Once you've determined the location of the hole in your door, it's now time to put in the cat flap. You can pick from a range of designs, from simple push-button units to microchip activated ones that only let your pet in. Whatever type of cat flaps you choose it is essential that your cat is able to use the flap comfortably without getting stuck outside in the rain.
It is a good idea to select circular fittings rather than one that is square, because circles can be more securely cut into door glass. It's because square holes are more likely to crack the glass when they're drilled. It's also a safer choice to use since you don't risk drilling into toughened glass that may break and cause injury to your pet or family members. This is especially crucial if you have a child or elderly person in your home who may be injured by shards glass.