10 Myths Your Boss Has About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Is your uPVC window or door mechanism broken? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to operate.
You'll lose energy when your double-glazed doors do not perform as they should. This also increases the risk of burglary. Owen the Locksmith can fix your door lock at an affordable price.
Snapped Key
When a key snaps off in a lock, it can be extremely difficult. It could also be a security risk, as the door may not lock and leave you open to intrusion. Fortunately, there are quick fixes you can attempt to fix the issue and get your door operating properly once more.
Keep calm. If you get scared and start playing around with your keys you may end up pushing the damaged piece of the key further into the lock, thereby making the situation much worse.
Spray WD-40 or another penetrating lubricant, into the lock. This will assist the broken piece come out more easily. double glazing repair near me can also employ a screwdriver in order to break pieces that might be blocking the way. If you have a piece of the key that's still sticking out, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but be careful not to push the damaged key further into the keyway.
Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these, you can bend a hook using needle-nosed pliers. Also, a pair tweezers is a good way to grasp and pull out the remaining bit of the broken key.
If you cannot remove the broken piece of key Use a lock deicer. It is available in most hardware stores and works by freezing any moisture that may be present in the lock.
If none of these solutions seem to work, it might be time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also modify your double glazing door mechanisms to make them more user-friendly. You can book repairs to your double-glazing online or contact us to discuss your needs.
Broken Cylinder
A broken cylinder is an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. To repair the cylinder, a locksmith will need to tap it. They can do this using an hammer or another tool, but the best way is to use a long match or a piece of wire. Then, put the match's end or wire near the keyway. The locksmith will then strike the lock to break it. This is more secure than using a hammer, which can cause damage to the lock.
double glazing repair is the primary cause of cylinder heads cracking. This can happen when the block and cylinder head are made from different metals such as cast-iron and aluminium. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand more quickly than the rest of the cylinder.
Corrosion can be a cause of fractures in cylinders. If the head and block of the cylinder are not maintained in a timely manner they could rust or corrode, which can cause them to expand more than expected. As time passes, this may also lead to cracks.
If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety of reasons. This can be caused by a malfunctioning locking mechanism or misalignment as well as a worn-out handle.
This is a straightforward and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith will usually be able to solve the issue within an hour of arriving at your home. double glazing repairs can repair the locking mechanisms, or replace the window handles and replace the gearboxes, depending on your particular requirements. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They can even recommend upgrades to 3 Star security Euro cylinders, TS007, that will add an extra layer of protection against burglars. It's a small price to pay for the security that comes from knowing that your uPVC doors are secure.
Broken Handle
Window handle locks have intricate mechanisms that wear out as time passes and use, so it's not a surprise they occasionally break. It isn't easy to determine the reason behind the broken window handle lock and then fix it properly.
Fixing the broken handle, whether it's an internal locking mechanism or latch can increase the security of your uPVC door and stop draughts. If you do not repair or replace your handle can be expensive and can damage the door's frame and lock, so it's worth taking some time to make sure you do it correctly.
With the window in the open position then loosen the screw holding the handle using the screwdriver. It should be located on the inside face of the back plate, and is normally concealed by an attractive cover for the screw for aesthetic reasons. It is not recommended to be able to replace any internal parts of the handle such as the levers and plates on either side. Ideally, keep these in the same order so that you can replace them again in the event of a need.
Then, using a second screwdriver take the screw off that connects the handle with the spindle at the back. Once the screw is loose, remove the handle and take the broken spindle out. Replace it with a brand new spindle, making sure it's the same length (you can buy them on the internet or at hardware stores). Screw it into place. Don't over tighten the screw as this can cause damage to the handle and window frame.
Make sure the new handle is fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able to unlock your window.
While you're working on the handle, be sure to check your uPVC windows are shut properly. If they're not cause damp and draughts in your home as and also affecting your home's energy efficiency. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they shut correctly.
Broken Spindle
It is more likely for the spindle to break than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that operates a locking device in the frame of the window. The handle is attached to a centre rod that in turn activates cams that resemble mushrooms, which lock into window frame keeps. If the dead latch mechanism does not open after the handle is turned, it's likely the spindle is damaged. This could be a frustrating issue.
Luckily, there are steps that can be taken to fix this problem. A professional locksmith will be able to quickly and effectively fix this problem. They will be able to remove the window handle using a tool that can remove the wheel portion of the mechanism, where the spindle is. This can be done with no damage to the handle or window frame.
After the wheel has been removed, the technician can inspect the spindle and determine what caused it to break. This involves breaking the spindle into its individual parts and carefully recording their general condition, as well as any specific areas of damage or excessive wear. This procedure is typically carried out by technicians in a clean environment.
Then, clean the damaged spindle. This will help remove any dirt or other debris that could be hindering it from functioning normally. After this the spindle could be repaired or replaced. If it is replaced, the technician will need the dowel that is similar in size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.
If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centers can sell generic replacements but if the window design is unusual, you will have to speak with an expert in cabinet making or woodworking who can recreate the exact part. Once the spindle has been installed, it can be connected to the handle. Place the screw holes on the handle to the screws that are already in the frame. Once the handle is set, you are able to operate your uPVC windows.