10 Things We All Hate About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.
It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good working order.
For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to source some plastic spacers to help the new pane to fit perfectly into the frame of the window.
Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.
It's a great idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is large, you might want to use security screens that has windows. This will give you the best of both.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.
Repositioning the hinges could help fix a window that is sliding. To do this, you'll have to open the window to get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws until they stay in position.
If you aren't able to move the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also loosen. This is usually due to screws that have loosened over time, but it can be due to the mechanism of the handle wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.
3. Water Leaks
It is crucial to take action if wake up every morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a fairly simple fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking may need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.
Verify that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.
Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges that are at fault. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.
Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to change the hinges on a window, but it's easier if someone helps hold the frame.
It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.
Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.
Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing gaps between the frame and sash. If they are beyond repair, it may be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge's side and may need to be cleaned. In some instances it is possible to replace the hinges.
upvc window repairs for draughts is window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.
upvc window repair of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.
Your windows made of upvc will continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional immediately.