20 Myths About Window Repair Busted

Window Repairs
Window repairs can help homeowners save money and ensure their comfort. In the event of major damage, such as broken glass or a damaged frame, a replacement window may be necessary.
However, many other issues can be repaired to extend the lifespan of your windows. The most frequent issues are:
Cracked or broken panes
It's a rock that's been thrown by your lawnmower or a tree branch that has been blown by high winds, cracked windows are not just unattractive but can lead to more expensive electricity bills because the broken pieces let cold air into your home. It's relatively easy to repair windows with damaged panes.
Begin by carefully removing glass using gloves and glasses. You may have to employ a utility knife to remove any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, clean the surface of the glass and the wood of the frame with a soft cloth or paper towel.
After cleaning the area, apply silicone caulking that is water-proof around the frame's perimeter. This will prevent water from getting into the frame through the cracks and cause further damage.
A bad crack in double-paned glass may cause gas to leak between the panes, making your windows less insulative. If the crack is severe enough that it threatens the integrity of the window or the pane inside is not there, you may need to consult a professional.
Cracks caused by thermal stress can occur when there's an extreme difference in temperatures between the outside and inside of your home, which causes the glass to expand or contract. If upvc window repair are situated on two sides of a glass, it is recommended to replace it instead of attempt to repair it.
Clear tape can be used to close cracks in windows that are not yet ready for replacement. It will also keep out cold winds and bugs. You can even cut a piece of nylon stocking or tarp large enough to cover the crack, and fix it with duct tape. This isn't a permanent solution however it can be useful in the event of a crisis and keeps cold air and insects out of your home. If you notice cracks appearing on the windows of your old ones it is recommended to contact your local company to see whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is a common problem with windows. It can ruin the appearance of a house and also pose an hazard to safety. It is possible to repair damaged wood. First, you will need to make sure that the source of the rot has been addressed. Examine for leaks in the roof and other places where water can enter the wood.
Next, you will need to take out any rotten parts of the window frame. This can be done using a claw hammer, chisel, or rasp. After removing the decayed wood, you'll have to replace it with new wood. Pre-treated wood is suggested for this project, as it is resistant to decay. If you cannot replace the timber that has rotted you can apply filler and wood hardener to reinforce the damaged area. This kind of product will be found in a lot of hardware stores. Follow the instructions on the label of the product to achieve the most effective results.
Once you have replaced the decayed areas of the windowsill, it's important to protect the repaired area. You can do this by applying an water-resistant wood sealant. Sikkens, for example, is a great product to use.
You can also use an epoxy filler that is two-part to shield the wood from further damage. It is easy to apply and gives an excellent finish. However, it is important to follow the directions for application on the label. When the epoxy filler is dry you can sand the surface of the wooden. Start with a rough sandpaper, then move on to more smoother grades.
The most important thing you don't would like to do is make the area that has been damaged by expose it to more water. It is recommended, that's why you should cover the repaired surface with an oil-based primer that will protect it from moisture. Then, you can reapply waterproof wood sealant.
The W won't open
The reason a window won't open can be caused by a variety of factors. Wood frames can warp during rainy weather, or the house might have sunk or someone might have closed it for security reasons. With a bit of patience and the right tools, you can open most stuck windows.
Gunk or debris that has accumulated could be the main cause of windows that aren't opening. The buildup of dirt and grime on the sliding tracks, hinges, and locks over time, says Acme Glass. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas will help to prevent oxidation and keep your windows functioning well.
Stuck windows could be caused by an unintentional break or loosening of the pulleys used to lift and lower the window. These parts can lose their tension and cause obstruction especially when the window is situated two or more stories higher than the ground.
If you're having trouble opening the window, try using a pry bar to gently push the window to open just a little at a time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.
Another issue with windows that don't open is a broken spring that prevents the window jamb from rising or lowering. Depending on who manufactured your windows, you'll be required to refer to the manual of your owner for additional instructions.
If you've tried cleaning the moving parts of your windows and lubricating them but they still won't open it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to inoperable, as a window that isn't properly closed can expose your home to burglary and water damage. Contact our team for more information about our windows replacement and services today!