20 Things You Need To Know About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't corrosion or rot.
It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers to help the new pane to fit correctly into the frame of the window.
If you plan to try to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.
It's a good idea to tape the gap once the glass is removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.
Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.
If you cannot reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles could also become loose. This is often caused by screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and do an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
If you awake to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.
This is a relatively easy fix and should be undertaken by any competent DIYer. Based on sash windows repair of the issue the caulking that was used up might need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.
Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and blow open with ease It could be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.
Like all mechanical parts, hinges can wear out over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.
It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you suggestions.
It is also crucial to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.
5. Draughts
Draughts can be caused by different factors. First, the hinges because of wear and tear, can become misaligned, this can cause a gap to form between the sash and the frame. If they are beyond repair, it might be required to realign them. The interlock may be unbalanced. This happens on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.
The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the risk of draughts.
Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking out cold air.
With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc you should consult a professional as soon as possible.