A Productive Rant About Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good shape.
Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.
Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.
Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.
To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.
If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.
uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The corner joints of the sash should align with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it's important to take action. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window harder to clean and reduce its energy efficiency.
It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.
It is also important to note that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason when your uPVC window is difficult to open, or if it opens in the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a simple procedure, but it is simpler if you have someone to assist in holding the frame in place.
It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you advice.
It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a few various factors. First, the hinges due to wear and tear can become misaligned, this can cause gaps to develop between the sash and the frame. They can be repaired by giving them good clean, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be possible to just give them a good clean, but in some instances it could be necessary to have these replaced.
The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.
One of the most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cozy!
With upvc windows repair and repairs your windows made of upvc will provide excellent insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than fix them. If you have any problems with your Upvc window you should consult a professional immediately.