Dont Make This Silly Mistake With Your Window Repair

Window Repairs
Window repairs can save homeowners money and make their homes warm. In the event of serious damages such as broken glass or a cracked frame, a window replacement could be required.
However, many other issues can be repaired to extend the lifespan of your windows. Common problems include:
Broken or cracked panes
Whether it's an errant rock that was tossed by your lawnmowers or a tree's branch blown by high winds, cracked window glass isn't just unattractive but can lead to higher electricity bills as the broken pieces allow cold air into your home. It's relatively easy to repair windows with damaged panes.
Start by carefully removing the glass using gloves and safety glasses. You may have to employ a utility knife to remove any remaining putty or old glazing compound that has accumulated around the edges of the frame. Next, wipe down the glass's surface and the wood of the frame using a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is waterproof around the frame's perimeter. This will stop water from entering the frame through the crack and causing further damage.
If window repairs near me have double-pane glass, a bad crack could compromise the gas layer between the panes and render your windows less efficient in insulating. If the crack is so severe that it threatens the integrity of the window, or if the inner pane is missing you might need to consult an expert.
Cracks caused by thermal stress can happen when there's a dramatic difference in temperature between the inside and outside of your home, causing the glass to expand or contract. If the cracks are located on two sides of a window, it is recommended to replace it rather than try to repair it.
Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It also keeps out cold and bugs. You can even cut a piece of nylon stocking or tarp that's large enough to cover the crack, and stick it to the wall using duct tape. This is not an indefinite fix, but it will keep insects out and cold air away from your home. If your windows are older and you're beginning to see cracks in the glass It's an excellent idea to talk with your local window company regarding whether replacing the entire window would be a better solution for you.
Rotten Wood
Wood rot is a frequent problem for windows. It can ruin the appearance of a house and it can also pose danger to your safety. It is, however, possible to repair rotted wood. First, you will need to ensure that the root of the rot has been taken care of. This can be done by looking for leaks in the roof and gutters that aren't functioning, cracked caulking and any other areas which allow water to penetrate the wood.
The next step is to take out the rotten components of the window frame. This can be done with either a chisel, a rasp or claw hammer. After removing the rotten wood, you'll need replace it with fresh wood. Pre-treated wood is recommended for this project since it will resist rot. If you are unable to replace the wood that has been damaged then you can use wood filler or hardener to repair the damaged area. Many hardware stores will carry this type of product. To achieve the best results, make sure you follow the directions on the label.
After you have replaced the decayed areas of the windowsill, it's essential to protect the newly-repaired area. This can be done by applying a waterproof wood sealant. A product like Sikkens is a good choice for this task.
Use a two-part epoxy in order to protect the wood from further damage. This product is easy to apply and provides an excellent finish. It is crucial to follow the instructions on the label. After the epoxy filler dries you can sand the surface of the wooden. Start with a rough sandpaper, and then move on to more smoother grades.
You don't want to expose the damaged part to further moisture. It is recommended, that's why you should protect the surface you have repaired with an oil-based prime that will protect it from water. Then, you can reapply waterproof wood sealant.
It won't open
There are many reasons a window won't open. Wood frames can warp during humid weather, the house could have settled or someone might have nailed it shut for security reasons. But with some patience and the right tools, all windows that are stuck can be opened.
Accumulated debris or gunk could be the main cause of windows that aren't opening. The buildup of dirt and grime on sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent corrosion and keep your window functioning correctly.
The pulleys used to raise or lower the window could be loosened, or break. These components can be weakened and obstructed when they are placed two or more floors above surface.
If you have difficulty opening a door, you can use a pry-bar to gently push the window open. Put a piece of wood on the frame to give the pry bar more leverage. Also, be careful not to scratch the window or wood. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.
Another common problem with windows that won't open is a broken spring that prevents the window jamb from rising or lowering. You will need to consult the owner's manual for more details based on the manufacturer of your windows.
If you have tried cleaning the moving parts of your windows and lubricating them but they still won't open, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home become functional to inoperable. A window that isn’t properly closed could expose your home to water damage and burglary. Contact our team today for more information about our replacement windows and services!