How to check the paint bucket

We know how to make a good injection bucket mold and using the bucket long time, also, we know how to using the bucket moldlonger. But we don’t know what kind paint buckets the mold producing is qualification.
I think the most important thing for us to check paint mold qualification or not is check its seal. We know, the normal bucket is not very consider about its sealing, they just care about whether it can use long time, not be broken easily and so on. But about the paint bucket, people are not only care about this; they also care about the sealing of the paint bucket. And also they consider about the sealing when a little big hitting.
You know, there is many paint in bucket. When during transporting the paint bucket, suddenly an accident happened, so we must make sure the sealing of the paint bucket while met hitting.(We couldn’t promise the big hitting, because we know any plastic product will be broken while met a big hitting.)
So, if you want to know whether the paint bucket is OK, I think you can pour the water into the paint bucket, and then placed the bucket down, forced the pressure, or pour the water into the bucket and dropped from a certain height to see if the bucket leaks, damaged. This is good methods to test the bucket.
Taizhou Jusheng Mould and Plastic Co., Ltd.
Email: [email protected]
[email protected], [email protected]
WhatsApp: 008619857618839
Website: http://www.MouldOne.com http://www.JacksonMould.com
To be a good bucket manufacturer
We are the bucket mold maker, and we can manufacture many bucket mold and we can promise our quality. And I think we are goodmold maker, because we have professional technical team and precision equipment.
When we think about the bucket mold, especially the paint bucket, the first thing we will worry about the thickness of the bucket, is it same or not. This problem is very common, so, when making the bucket mold, this is what we solve first. To solve this problem, I think we should know what cause this. The first reason for this is the cooling water in the bucket mold flowing is uneven, so, it will make the hot flow is quickly and the low temperature will flow slowly. Then, the thickness of the bucket is different.
And about the paint bucket, we not only consider about the thickness, but also the ejector pin. Because as we know, during the edge of the bucket, there is a undercut，so, we should let the undercut out before fall。And if there is any other undercut, so we need the cam.
Those problems are not difficult for our factory! So, if you need more information about the technology about the bucket mold to be solved, I hope you can send me an
Taizhou Jusheng Mould and Plastic Co., Ltd.
Email: [email protected]
[email protected], [email protected]
WhatsApp: 008619857618839
Website: http://www.MouldOne.com http://www.JacksonMould.com
How to make a high quality cup mould
JushengMould---High Quality Mould
JushengMould alwaly faith noty provide for you a high quality mould but also a attitude for the plastic mould .
Cup mould is one of the various of the plastic mould we made.We need to know about some points to make the good processing for the cup moulds. As follows:
PS,PC,PMMA are all hard material compare with the generic mould material, they have very low fusion point .Because this material is easy to solidification so that we need have a good uniform cooling systerm effect in mould core and cavity.Otherwise,We can get a uniform thinwall and long life cup mould.
Taizhou Jusheng Mould and Plastic Co., Ltd.
Email: [email protected]
[email protected], [email protected]
WhatsApp: 008619857618839
Website: http://www.MouldOne.com http://www.JacksonMould.com
producing PVC pipe fitting
We are the professional injection mold maker, and we manufacture PVC pipe fitting well, because we manufacture the injection mold for more than 10 years. You can
As you know, the material of PVC pipe fitting is good; it is stable and not easy to be acid resistant, also it has high strength. In one word, it is a good material to make the pipe fitting mold and it can be make the pipe fitting well. Also the pipe fitting will be used in a long time.
When the pipe fitting mold working, the first thing we do is put the plastic material of pipe fitting into thermo tank of injection moldingmachine. Then after heated and melted, put the material into the cavity of mold through gating system with the help of screw and plunger. Then pipe fitting will be shaped in cavity after heat, pressure and cooling. Then pull the pipe fitting out. The product is producing.
Taizhou Jusheng Mould and Plastic Co., Ltd.
Email: [email protected]
[email protected], [email protected]
WhatsApp: 008619857618839
Website: http://www.MouldOne.com http://www.JacksonMould.com