Prevent vs Random Amphiphilic Glycopolymer Nanopaticles while GlucoseResponsive Vehicles

Molecular machines hold keys to performing intrinsic functions in living cells so that the organisms can work properly, and unveiling the mechanism of functional molecule machines as well as elucidating the dynamic process of interaction with their surrounding environment is an attractive pharmaceutical target for human health. Due to the limitations of searching and exploring all possible motors in human bodies, designing and constructing functional nanorobots is vital for meeting the fast-rising demand of revealing life science and related diagnostics. Here, we theoretically designed a nanoparticle-DNA assembled nanorobot that can move along a solid-state membrane surface. The nanorobot is composed of a nanoparticle and four single-stranded DNAs. Our molecular dynamics simulations show that electroosmosis could be the main power driving the movement of a nanorobot. After the DNA strands were one-to-one captured by the nanopores in the membrane, by tuning the surface charge density of each nanopore, we have theoretically shown that the electroosmosis coupled with electrophoresis can be used to drive the movement of the nanorobot in desired directions along the graphene membrane surface. It is believed that the well-controlled nanorobot will lead to many exciting applications, such as cargo delivery, nanomanipulation, and so on, if it is implemented in the near future.With the rapid advances in functional optoelectronics, the research on carbon-based materials and devices has become increasingly important at the terahertz frequency range owing to their advantages in terms of weight, cost, and freely bendable flexibility. Here, we report an effective material and device design for a terahertz plasmonic metasurface sensor (PMS) based on carbon nanotubes (CNTs). CNT metasurfaces based on silicon wafers have been prepared and obvious resonant transmission peaks are observed experimentally. The enhanced resonant peaks of transmission spectra are attributed to the surface plasmon polariton resonance, and the transmission peaks are further well explained by the Fano model. Furthermore, the different concentration gradients of pesticides (2,4-dichlorophenoxyacetic and chlorpyrifos solutions) have been detected by the designed PMSs, showing the lowest detection mass of 10 ng and the sensitivities of 1.38 × 10-2/ppm and 2.0 × 10-3/ppm, respectively. Good linear relationships between transmission amplitude and pesticide concentration and acceptable reliability and stability have been obtained. These materials and device strategies provide opportunities for novel terahertz functional devices such as sensors, detectors, and wearable terahertz imagers.Hydroxyl radical (•OH) can hydroxylate or dehydrogenate organics without forming extra products and is thereby expediently applied in extensive domains. Although it can be efficiently produced through single-electron transfer from transition-metal-containing activators to hydrogen peroxide (H2O2), narrow applicable pH range, strict activator/H2O2 ratio requirement, and byproducts that are formed in the mixture with the background matrix necessitate the need for additional energy-intensive up/downstream treatments. Here, we show a green Fenton process in an electrochemical cell, where the electro-generated atomic H* on a Pd/graphite cathode enables the efficient conversion of H2O2 into •OH and subsequent degradation of organic pollutants (80% efficiency). Operando liquid time-of-fight secondary ion mass spectrometry verified that H2O2 activation takes place through a transition state of the Pd-H*-H2O2 adduct with a low reaction energy barrier of 0.92 eV, whereby the lone electron in atomic H* can readily cleave the peroxide bridge, with •OH and H2O as products (ΔGr = -1.344 eV). Using H+ or H2O as the resource, we demonstrate that the well-directed output of H* determines the pH-independent production of •OH for stable conversion of organic contaminants in wider pH ranges (3-12). The research pioneers a novel path for eliminating the restrictions that are historically challenging in the traditional Fenton process.Chromium(VI) contamination of drinking water arises from industrial activity wherever there is a lack of environmental legislation enforcement regarding the removal of such pollutants. Although it is possible to remove such harmful metal ions from drinking water through large-scale facilities, there currently exists no safe and simple way to filter chromium(VI) oxoanions at the point of use (which is potentially safer and necessary in remote locations or humanitarian scenarios). High-surface-area cloth substrates have been functionalized with calixarene molecules for the selective capture of aqueous chromium(VI) oxoanions in the presence of structurally similar anions. This is accomplished by pulsed plasmachemical deposition of a linker layer and subsequent functionalization with dimethylaminomethyl-calixarene (5,11,17,23-tetrakis[(dimethylamino)methyl]-25,26,27,28-tetrahydroxycalix[4]arene). Chromium(VI) oxoanions are captured by simply passing polluted water through the functionalized cloth, while other ions not harmful/beneficial to human health remain in the water. These cloth filters are simple to use, highly selective, and easily recyclable-thus making them attractive for point-of-use application in geographic regions lacking appropriate wastewater treatment plants or flawed environmental monitoring systems. Chromium(VI) pollutants have been successfully removed from real-world contaminated industrial wastewater streams using the dimethylaminomethyl-calixarene functionalized cloths.Toward the successful development of artificial intelligence, artificial synapses based on resistive switching devices are essential ingredients to perform information processing in spiking neural networks. In neural processes, synaptic plasticity related to the history of neuron activity plays a critical role during learning. In resistive switching devices, it is barely possible to emulate both short-term plasticity and long-term plasticity due to the uncontrollable dynamics of the conductive filaments (CFs). HIF inhibitor Despite extensive effort to realize synaptic plasticity in such devices, it is still challenging to achieve reliable synaptic functions due to the overgrowth of CFs in a random fashion. Herein, we propose an organic resistive switching device with bio-realistic synaptic functions by adjusting the CF diffusive parameter. In the proposed device, complete synaptic plasticity provides the history-dependent change in the conductance. Moreover, the homeostatic feedback, which resembles the biological process, regulates CF growth in our device, which enhances the reliability of synaptic plasticity.