Ten Myths About Wall Fire Place Electric That Dont Always Hold

A Wall Fire Place Electric Adds Warmth and Style to Any Room
A wall electric fireplace is a great focal point for any room. It's cozy and inviting. It can be installed in a flush or partially recessed into the wall. If it is recessed, follow the manufacturer's guidelines on framing and putting the fireplace into the wall.
Installation is similar to hanging a TV or shelving. The majority of models require an electrician to connect the electrical system.
Easy to Install
A wall-mounted electric fireplace can provide warmth and class to any space. It is simple to install and does not require gas lines or exterior venting. It is available in various sizes and styles that can be adapted to any room in the house. It is crucial to think about the location of your home before choosing a particular model.
For example, if you would like to place your fireplace on top of your television ensure that the TV screen is big enough to allow for it. Consider whether your furniture will block the fireplace's view. A wall-mounted fireplace will save you the floor space and will give your home a more open and spacious feel.
Installing an electric fireplace that is recessed is easy when you follow the directions included with it. You will first need to create the opening for the fireplace with 2x6s that are one inch shorter than the wall that is finished. You should also mark the center of the opening rough and the studs should be placed every 16 inches across both plates. Once you have framed your opening, use a level to ensure that it is in a straight line. Then hang the bracket and secure it. Remove the side brackets from the fireplace to get access to the screws.
Attach the fire appliance to the bracket after it is hung. Use large washer-head screws and wall anchors. Make sure that all the screws are securely driven into the solid backing. It is possible to install an outlet on the wall. This can be done by a licensed electrician according to local codes.
If you do not have carpentry skills, hire a professional to build out the fireplace wall or build frames in an existing wall for you. They can also apply drywall, tape or the walls prior to when you put in your fireplace. You can also paint a wall to give it a more finished appearance. Once you have completed these steps, your fireplace will be ready to use.
Easy to Operate
A wall-mounted electric fireplace is simple to operate. Many models include a simple remote to control the flame effects and heating functions. Some have an impressive smartphone application that lets you control the fireplace from anywhere in the room. Certain models can also be controlled with voice using Amazon Alexa or Google Assistant. These features make wall mounted electric fires a great addition to any home.
The first step to install a wall-mounted electric fire is to consult the model's installation instructions. Some units require a professional's help to install them, while others are easy to install by yourself. It is crucial to understand the weight of these units, and ensure that your wall can support them before you begin. In addition, you must pay attention to the direction in which heat will blow and that there are no combustible materials nearby.
Certain wall-mounted fireplaces are able to be connected to an outlet, while others have to be hardwired. If you're unsure whether you can safely do it yourself, you should consider hiring an electrician who can do the task for you. Based on the model you might need to perform basic framing or bump out to accommodate the electrical cord and plug.
Another thing to keep in mind is that the location of your fireplace will affect its operation and appearance. For instance, some people prefer having their fireplaces at eye level when they're sitting on their sofa. If that's you need to ensure that your TV can still be placed above the fireplace.
You can use a spirit-level for marking the location of the brackets on the wall. This will allow you to determine if the wall is able to support the fire. You can then check if the wall is stud or drywall and ensure that you have a three-spot outlet within reach of the fireplace's cord.
Easy to Clean
Modern electric fireplaces that are corner-mounted are a lot easier to clean than their gas or wood-burning counterparts. This is due to the fact that they don't produce ash nor creosote, as they don’t burn anything. They must still be cleaned regularly to ensure they are looking their best and working at their highest. Fortunately, the cleaning procedure is easy and doesn't require any harsh chemicals. You can use a damp cloth to clean the exterior of the fireplace, and a dry cloth to remove the dust from the inside components.
Before cleaning best wall hung electric fires , be sure that it's fully cool. You must also disconnect the unit from the outlet or, if it's wired in, turn off the circuit breaker that is the one that powers it. Avoid using any liquid cleaners on the grates since they can pose an electrical danger. Use a lint-free cloth lightly dampened with lukewarm lukewarm. It is also advised to avoid using any cleaning products that contain abrasive chemicals as they could scratch or harm the surface of your fireplace.
Then, clean the grate using your damp cloth. You may want to also clean the glass's sides and other areas of the fire place that are not covered by the grates. You can also make use of the soft brush attachment of a vacuum to remove dirt and dust from your fireplace's interior.
After you have done this, you are now able to begin cleaning the light bulbs and blower. It is important to remember that you shouldn't use any water on the light bulbs or the blower, because this could cause an electrical danger. Instead, it's a great idea to employ a dry microfibre fabric to get rid of any dust from these areas. To avoid injury, shut off the fireplace before turning it off. Be aware that some electric fireplaces do not have ventilation. This is why you must be cautious when cleaning them. Check the owner's manual in case you require assistance.
Easy to maintain
Electric fire places in the wall require minimal maintenance as long they are installed and operated correctly. However, it is recommended that an electrician inspect the unit annually to ensure that it is operating safely and efficiently. Maintenance for your day can be as simple as wiping the glass surface to keep it free of dust and dirt.
Before cleaning the electric fireplace, make sure to disconnect the plug and turn off the electricity. This will avoid electric shocks as well as other hazards. You can take off the access panel or the glass front of the fireplace once it is turned off. Clean the glass with a dry cloth made of microfibre to get rid of fingerprints. If the glass has a few stubborn spots or stains, slightly dampen the cloth with a mixture of water and cleaner before wiping. If your fireplace is equipped with a blower, use a microfibre dry cloth instead of a damp one to prevent getting water into any electrical components.
In general you should avoid using any cleaning products that are abrasive or paper towels because they could scratch or harm your glass. In most cases, you can wipe the glass surface with a lint free cloth. If you notice that the glass is turning dull or dirty, you can make use of glass cleaner or distilled vinegar to get rid of buildup. You can spray the cleaner directly onto the cloth to avoid streaking.
When the glass is clean you can replace it and plug in your fireplace. If your fireplace has a mirrored surface, you might need to rub the mirror gently with a soft towel to remove any streaks. You can also buy glass cleaner spray in a variety of strengths.
You should also clean the air vents and inlets at the base of your fireplace. They can get very dusty and may interfere with your fireplace's flame effect. For best results, you can apply a soft dry microfibre cloth for wiping these areas. If you have to clean a difficult-to-reach area, you can try using compressed air to remove any dust that has settled in these tight spaces.