The History Of Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.
It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.
For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.
It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.
To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in place.
If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.
uPVC handles could also loosen. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fit. The joint at the corner of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
If you're waking up to wet floors and damp walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.
It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like any mechanical part hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to help you hold the frame up.
Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.
Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form where the sash joins the frame. If sneak a peek here are damaged beyond repair, it could be required to realign them. Second, the interlock can also become misaligned. It is located on the hinge side and may need to be cleaned. In some cases it is possible to replace them.
The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the possibility of draughts.
Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking cold air.
The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and they may reach a point where it is more cost-effective to replace them rather than fix them. So, if you're having issues with your upvc windows, it's recommended to seek help from a professional immediately.